What is the secret of this convenient mounting lamp plug?

The utility model discloses a lamp plug easy installation, characterized in that : said lamp plug includes a catheter was inserted into the lamp, spiral tube is inserted, the pin insertion positive electrode, negative electrode and insulating spacer pin insertion, the catheter insertion end of the mounting pin is inserted in the positive, spiral tube inserted in the top of the collar pin lamp plug and the positive electrode of the catheter is inserted, the insulating pad is mounted at the other end, a negative electrode mounted on the insulating spacer pin is inserted, and the positive electrode by an insulating pad insulated from the lamp plug pin.

The catheter is inserted and the negative pin lamp plug with a screw. The positive and negative wire to the positive and negative light lamp plug wire-speed and low-pressure way to insert the knob connected to the lamp panel lights convenient seat. The utility model when installing the lamp lights, the lamp into the lamp holder, lamp holder can rotate, the installation of a light note just a few minutes, installation is simple, convenient and fast.

The utility model relates to a LED Horizontal Plug Lamp, specifically an easy to install lights lamp plug. Many energy-saving lamps are set into the removable structure, the current structure of the most commonly used removable structure is in line with snap hook and connected to each other through the slot, the connecting structure is the use of the hook itself resilient, then you need outside help, so there are some problems, that is, if the card is not conducive to disassemble too tight, too hard but also easy to make the hook fracture, and if the card is too loose and easy to make two by detachment, so snap unreliable. Therefore, this structure is simple, but not easy to assemble and disassemble.

The utility model is designed to provide an easy to install lights lamp plug. The purpose of this utility model is achieved through the following technical solutions. The lamp plug includes a catheter inserted lamp, spiral tube inserted, cathode pin lamp plug, insulated pad and the negative pin lamp plug, lamp plug one end of the catheter installed in the positive pin is inserted, the screw top tube inserted in the cathode collar pin lamp plug and insert the catheter insulating pad is mounted at the other end, a negative electrode mounted on the insulating spacer pin is inserted, and the positive electrode by an insulating pad insulated from the lamp plug pin.

The catheter is inserted and the negative pin lamp plug with a screw. The positive and negative wire to the positive and negative light lamp plug wire-speed and low-pressure way to insert the knob connected to the lamp panel lights convenient seat. The utility model and has the following advantages over the prior art. The utility model when installing the lamp lights, the lamp into the lamp holder, lamp holder can rotate, the installation of a light note just a few minutes, installation is simple, convenient and fast.

What is the major benefit of a revolving lamp plug?

The utility model discloses a rotatable lamp plug, including the tube connectors, plug connectors, plugs and plugs, lamp connector cavity along the circumferential direction of the array has several slots, plug connectors and plug head is fixedly connected with the bottom of the plug connector can be engaged with the through-hole of the lamp connected to a first snap member, so that the plug connector and the connector member and rotatable relative to the lamp ; plug is provided on the side walls chute, chute plug installed in the bottom of the latch with a bump, the latch movement along the chute can bump into or out of the card slot connector tube. The utility model structure design, ingenious, easy to use, safe and reliable, long service life, ensure the long-term use and long-term effective and practical.

The utility model relates to the field of LED light technology, in particular to a rotatable lamp plug. Because LED lamps have high luminous efficiency, long life, low power consumption, energy saving and environmental protection, etc., there is a growing trend to replace traditional light sources, along with new materials, new technologies continue to make breakthroughs in the purchase of lamps, LED lamps become people's choice.

However, because the LED is not a surface light source, but only a point source, the LED light-emitting angle is relatively small, therefore, the existing LED lamps are lamps designed to be rotatable, to meet the needs of each lighting point. However, by the rotation of the existing structure with the bumps and grooves is to achieve a relative rotation and relative to the fixed, but because of defects in the plastic itself, long-term use, because the fatigue resistance of plastics, there can not be rotated in the final phenomenon.

The technical problem to be solved by the utility model is to provide a rotatable LED Horizontal Plug Lamp, avoiding the serious consequences of defects in the material itself is brought to ensure effective and long term use.

To solve the above technical problem, the technical solution adopted by the utility model are: a rotatable lamp plug comprising the lamp connection, plug connectors, plug and a plug, the tube connecting the cavity in the circumferential direction of the array element there are several slots, the plug connector plug member is fixedly connected with the bottom of the plug connector can be snap engaged with the first through-hole of the connector tube and the plug connector member and the tube so that the connecting member relative rotation ; chute plug has a side wall, the chute attached to the latch, the latch has a bottom projection, movement of the latch along the chute may bump into or out of the card connector of the lamp socket.

On the face of the plug and the plug is provided with projections, blocking and raised his head with a second mating snap, snap and plug between the second sidewall has slotted so that the second snap elastic. Outer surface with a plurality of bolt slip bumps. Plug and plug connections fixed, the head of the screw hole with a plug cap by installing screws.

The utility model compared to the prior art, has the following beneficial effects : reasonable structure design, ingenious, easy to use, safe and reliable, long service life, ensure the long-term use and long-term effective and practical.

Is snap structure of a fluorescent lamp plug outdated?

The utility model is applicable to fluorescent technology, provides a snap structure of a fluorescent lamp plug, opened a can accommodating groove on the end face of the lamp plug ends of the non-metallic cap lamp, the groove equipped with a number of snaps, at the end face of the recess around the opening of the non-metallic cap also has a number of escape grooves.

Snap structure of a fluorescent lamp The utility model provides a lamp plug, opened a recess accommodating the lamp plug on the end face of non-metallic cap, when you install the lamp plug, located in the groove by the lamp plug snaps fixed ; demolition when the lamp plug, because there is a groove around the opening of escape groove, hold down the edges of the grooves pressed in the direction to escape groove, the groove will be bent to avoid the side slot, so you can easily take down the lamp plug.

Prior art fluorescent lamp plug generally fixed by riveting pressure on both ends of the metal cap lamp, the metal cap is cylindrical, riveting process is more complex, and this will cause the lamp plug to connect riveting difficult to disassemble, when fluorescent faulty lamp plugs need to be removed when it is difficult to LED Plug Lamp removed.

The utility model technical problem to be solved is to provide a snap fluorescent structure facilitates installation and removal of the lamp plug. The utility model is achieved, snap structure of a fluorescent lamp plug in the end face of the non-metallic cap open at both ends with a fluorescent accommodating lamp plug a groove that features a number of snaps, to the nonmetallic surface groove around the end cap also offers a number of escape groove.

The recess is square, symmetrically around the snap- in of the inner recess. The relief groove disposed symmetrically around the recess in the end face of the non-metallic cap. Snap structure of a fluorescent lamp the utility model provides a lamp plug on the end cap of the creation of non-metallic surfaces.

When you install the lamp plug, located in the groove by the lamp plug snaps fixed; When removing the lamp plug, because there is a groove around the opening of escape groove, hold down the edges of the grooves pressed in the direction escape groove, the groove edges are avoid bending toward the slot, so you can easily take down the lamp plug.

Is programmable lamp plug really a boost of energy efficiency?

This is a codable circuit board, comprising a plurality of arranged on a printed circuit board traces, each corresponding to one of the plurality of traces of a single bit in an encoded data word;

Each of said plurality of circuit runs including a single necked, wherein the constriction is capable of being burned out by passing it through the passage of a sufficient current to form therein a gap.

An encodable printed circuit board as claimed in claim 1, wherein the conductor tracks are made of copper. An encodable printed circuit board as claimed in claim 1, wherein the constriction is at least as long as wide. A encodable lamp plug, with: a lamp plug body; a plurality of logic ports and a ground terminal, which extend through the lamp plug body; a circuit board attached to said plurality of logic pins and said one ground terminal, wherein the circuit board comprises conductive traces electrically connected between a ground terminal and said plurality of logic pins; each of the conductors has a single constriction, and the single constriction is capable of being burned out by passing it through the passage of a sufficient current to form therein a space; a device which is attached to the body and covering the printed circuit board; a lamp, and means to attach the body to the air.

An encodable G24 9W led plug lamp as claimed in claim 4, which further comprises: Power supply terminals which extend through the body; wherein the means for attaching the body to the lamp supply current conductor, and wherein the power supply conductor electrically connected to the lamp at one end and the power supply connections at the other end.

An encodable lamp plugs as claimed in claim 4, wherein the conductor tracks are made of copper. An encodable lamp plug as claimed in claim 4, wherein the constriction is at least as long as wide. A method for producing a codable lamp plug comprising the steps of: Providing a ground terminal and a plurality of logic ports which extend through a lamp body;

Printing a plurality of circuit runs on a printed circuit card, each of the conductors has a single constriction; Mounting the circuit board on which a ground terminal and said plurality of logic pins, said plurality of circuit runs corresponding to connections between said ground terminal and said plurality of logic pins; Providing a lamp; Attaching said lamp plug body to the lamp;

Burnout predetermined individual of the circuit lines depending on the type of lamp provided. A method according to claim 8, further comprising: Providing power supply connections which extend through the lamp plug body; Attaching a power conductor to said power supply terminals on its one end and to the lamp at its other end.

It is a method according to claim 8, wherein the method of manufacturing a plurality of conductive traces further comprises preparing the conductor tracks of copper.

A method according to claim 8, wherein the method of manufacturing a plurality of conductive traces further comprises forming the conductive traces with a constriction, which is at least as long as broad comprises.

Why is lamp plug LED becoming more popular?

The utility model relates to the field of lighting, in particular to a lamp plug-in and hanging LED lights. With the improvement of people's quality of life, has become a wide variety of lighting requirements. Hotel Arcade gorgeous lighting needed to set off grade; home interior needs to display personalized mood lighting; city night under the glare of the lights need to show downtown.

When decorative lighting, depending on the installation location and habits, some hanging lamp requires some light to be inserted is fixed. Therefore, the need for adequate hanging lights and lamp plug lights, to prevent a situation does not meet the conditions for the emergence of the bulb.

In response to these problems, the utility model aims to provide a lamp plug- and hanging LED lights, both suspended and can use lamp plug-in use, using a wide range. To achieve the above object, the present utility model, and a lamp plug- type LED lamp suspension comprising at least electrically connected to both the insertion of the lamp body and the lamp body on the suspension structure but also the electrical connection. Preferably, the structure consists of changes in the movement LED lms66-13w LED Horizontal Plug Lamp and lamp plug connections matching connector. The connection from the lamp plug connector clip, connect a nut.

The utility model uses lamp plug and lamp plug for external wiring structure, able to do both using hanging use, but also the use of lamp plug-in to meet the users' different needs.

When provided on the interior wall outlet, if the use of LED lights in this program, you first turn on the LED lights lamp plug and then lamp plug into the outlet. However, the LED light switch may be provided on the lamp body, the switch may be separately provided. When the indoor wall outlet does not need to be hanging placement, if the use of this program the LED lamp 6, you need to recover the lamp plug, lamp plug the two lamp plugs will be conducting the clamping jaws, and then the outside 8 is connected to the connecting wire nut 7, to complete the connection lines. The suspension wire hung on the structure of the suspension member 5, complete suspension. For safety, the safety cover may be provided at an upper end of said structure.

the new NFC - 15100 standards for electrical installations in the home

With the new NFC - 15100 standards for electrical installations in the home, phone lamp plugs "pull" type, that is to say, the good old T taken in reverse, are replaced with RJ45 network sockets.

After some research on the net, I realized that so it was easy to find the wiring diagrams of the old lamp plugs, especially not with the wind in the case of the famous RJ45. Here is the result of my research into practice.

Firstly, the phone comes to the house by the PTT cable: general two gray son. In older plants, the gray son can get a box, it even gray, with two fuses, which have become obsolete. This box located at the top of our front door, is the property of France Telecom, which is responsible for the line that gets there, and should not normally touch. After this dialog is the domestic installation and you can do what you want.

Today, the standard plans to replace this box with another box called DTI (Termination Device Interior), which was installed in the basement, next to another junction box for TV antenna:

DTI has a terminal twelve blocks numbered. It connects our network cable, which is the type grade 2 FTP. This means that it is a cable with 4 twisted pairs (to reduce noise), with a shielding foil. This creates a telecom infrastructure in theory and computer network for applications to 250 MHz for a length of 60m. This is not the best, but it's good for a reasonable price. At best, it provides a residential computer network to 1Gbit / s and possibly the TV (but not in HD). Well, at first, these cables will just serve for telephone and ADSL.

At the other end of the cable, including the living room, there is a RJ45 lamp plug associated with the antenna lamp plug (bottom):

Connecting the network cable to the RJ45 lamp plug was performed according to EIA Standard 568 (there is also the B. but it does not change much as long as it remains consistent for each socket in the house)

With Céliane model Legrand, just press each strand in a metal notch that will cross over to the fine sheath. There's no need to strip strand is automatic!

Regarding the TV, this was used to signal for our HD freebox channels. The quality seemed to us good, but a significant improvement was achieved by DTT via the antenna cable.