I have recently reported already thought about LED replacement for my Halogen spotlights and am very happy with the result. Now a E14 reflection light in the kitchen I broke down and I've been looking here for a replacement by an LED reflection light source.
Unfortunately, the choice of lamps with this base and in this form is still quite clear. Both in our local hardware stores, and on the Internet, there are mainly pretty ugly representative, which are a GU10 lamp with an adapter in the base. Since my radiator in the kitchen quite open hanging from the ceiling, this eye insults came out of the question for me.
Luckily I then came across the Lighting EVER R50 Reflection Light Sensor with E14 base. Although my previous experience with Lighting Ever was rather mixed, I've ordered me four of these lamps.
The lamp emits much heat. A radiation to the rear - normally as usual with the reflection lights - is prevented by the wording. For me, not a problem as I use the lamps as a work surface lighting, in other applications, which can, however, provide for an unsightly light distribution...
All in all, the Lighting offers a nice alternative to incandescent bulbs. The light is warm, without drifting into the Yellow, the brightness is high (perhaps also by the lack of radiation to the back and to the side) and the price is also reasonable.
Today I got even a "normal" E14 LED Candle in shape with 3W of Lighting Ever. Again, the report is true basically. The lamp is very bright and warm. The lower part of the lamp is made of ceramic, which prevents radiation for the collection and a slightly different illumination characteristics as normal candle bulbs has. With 8, - EUR the lamp is as favorable as the reflection light version.
This blog will help people know the LED lighting types, Our LED Lighting from major suppliers in China. View LED Lighting product list and import LED Lighting from China.
Monday, January 20, 2014
Sunday, January 19, 2014
the new NFC - 15100 standards for electrical installations in the home
With the new NFC - 15100 standards for electrical installations in the home, phone lamp plugs "pull" type, that is to say, the good old T taken in reverse, are replaced with RJ45 network sockets.
After some research on the net, I realized that so it was easy to find the wiring diagrams of the old lamp plugs, especially not with the wind in the case of the famous RJ45. Here is the result of my research into practice.
Firstly, the phone comes to the house by the PTT cable: general two gray son. In older plants, the gray son can get a box, it even gray, with two fuses, which have become obsolete. This box located at the top of our front door, is the property of France Telecom, which is responsible for the line that gets there, and should not normally touch. After this dialog is the domestic installation and you can do what you want.
Today, the standard plans to replace this box with another box called DTI (Termination Device Interior), which was installed in the basement, next to another junction box for TV antenna:
DTI has a terminal twelve blocks numbered. It connects our network cable, which is the type grade 2 FTP. This means that it is a cable with 4 twisted pairs (to reduce noise), with a shielding foil. This creates a telecom infrastructure in theory and computer network for applications to 250 MHz for a length of 60m. This is not the best, but it's good for a reasonable price. At best, it provides a residential computer network to 1Gbit / s and possibly the TV (but not in HD). Well, at first, these cables will just serve for telephone and ADSL.
At the other end of the cable, including the living room, there is a RJ45 lamp plug associated with the antenna lamp plug (bottom):
Connecting the network cable to the RJ45 lamp plug was performed according to EIA Standard 568 (there is also the B. but it does not change much as long as it remains consistent for each socket in the house)
With Céliane model Legrand, just press each strand in a metal notch that will cross over to the fine sheath. There's no need to strip strand is automatic!
Regarding the TV, this was used to signal for our HD freebox channels. The quality seemed to us good, but a significant improvement was achieved by DTT via the antenna cable.
After some research on the net, I realized that so it was easy to find the wiring diagrams of the old lamp plugs, especially not with the wind in the case of the famous RJ45. Here is the result of my research into practice.
Firstly, the phone comes to the house by the PTT cable: general two gray son. In older plants, the gray son can get a box, it even gray, with two fuses, which have become obsolete. This box located at the top of our front door, is the property of France Telecom, which is responsible for the line that gets there, and should not normally touch. After this dialog is the domestic installation and you can do what you want.
Today, the standard plans to replace this box with another box called DTI (Termination Device Interior), which was installed in the basement, next to another junction box for TV antenna:
DTI has a terminal twelve blocks numbered. It connects our network cable, which is the type grade 2 FTP. This means that it is a cable with 4 twisted pairs (to reduce noise), with a shielding foil. This creates a telecom infrastructure in theory and computer network for applications to 250 MHz for a length of 60m. This is not the best, but it's good for a reasonable price. At best, it provides a residential computer network to 1Gbit / s and possibly the TV (but not in HD). Well, at first, these cables will just serve for telephone and ADSL.
At the other end of the cable, including the living room, there is a RJ45 lamp plug associated with the antenna lamp plug (bottom):
Connecting the network cable to the RJ45 lamp plug was performed according to EIA Standard 568 (there is also the B. but it does not change much as long as it remains consistent for each socket in the house)
With Céliane model Legrand, just press each strand in a metal notch that will cross over to the fine sheath. There's no need to strip strand is automatic!
Regarding the TV, this was used to signal for our HD freebox channels. The quality seemed to us good, but a significant improvement was achieved by DTT via the antenna cable.
Thursday, January 16, 2014
Lunartec 7×3 watt reflection lights pass the test
LED lamps used to feature 12V connection, there are now few. The
Lunartec 7x 3 Watt LED spotlight ' cool white ' PAR 30, E27, 230 is the
first design that delivers usual light levels.
With the LED lamps it is not yet quite cheating: effective, high-efficiency they are okay.
The power consumption is low, a maximum of 3-6 watts even with almost 100 reflection light in the housing or a power chip. And 3 Watt Input with high efficiency also showed up only a brightness corresponding to 12 to 16 watts of a light bulb, even if like to multiples specified.The Lunartec 7x 3 Watt LED spotlight " cool white ", available at Pearl, is now for the first time different:
In him not stuck 12-90 normal white reflection light, but seven power chips, each with 3 watts. Power together 21 watts, which may correspond to a bulb of 60 to 100 watts - and that too with light collection!
This is the Lunartec 7×3 Watt reflection light 30 / LED spotlights the first LED lamp that can really be competing with incandescent lamps and CFL lamps in the household. They are available in cool white - similar to daylight, with 1150 lux slightly lighter - or warm white - with 820 lux about 1/3 less bright, but rather fits in the light color to incandescent lamps.
Which color of light is preferred depends on the type of application : For work and for illumination on cloudy days, the daylight color is better late at night would make this one but to awake. Then, however, might even be too much of a good thing by their brightness the warm white version.
As photo lamps, reflection light are not suitable, even if energy saving lamps as an occasion to celebrate successes and reflection light to these significant advantages are: No slow brightening and no risk of breakage. However, the spectrum of the reflection light is still too unevenly - the tested cold white Lunartec 7×3 Watt PAR 30 delivered compared to daylight a greenish image - and the light distribution as well : let The reflection light provide a highly focused light, with the photograph only small objects.
The crux of the Lunartec 7×3 Watt PAR 30 is so far the price : They cost just under 80 euros individually, in packs of four are still 250 euros. While it may cost more, some designers lamp, but a "pear" you give that kind of money but hardly out, especially since in the past some Lunartec lamps service life problems had.
With the LED lamps it is not yet quite cheating: effective, high-efficiency they are okay.
The power consumption is low, a maximum of 3-6 watts even with almost 100 reflection light in the housing or a power chip. And 3 Watt Input with high efficiency also showed up only a brightness corresponding to 12 to 16 watts of a light bulb, even if like to multiples specified.The Lunartec 7x 3 Watt LED spotlight " cool white ", available at Pearl, is now for the first time different:
In him not stuck 12-90 normal white reflection light, but seven power chips, each with 3 watts. Power together 21 watts, which may correspond to a bulb of 60 to 100 watts - and that too with light collection!
This is the Lunartec 7×3 Watt reflection light 30 / LED spotlights the first LED lamp that can really be competing with incandescent lamps and CFL lamps in the household. They are available in cool white - similar to daylight, with 1150 lux slightly lighter - or warm white - with 820 lux about 1/3 less bright, but rather fits in the light color to incandescent lamps.
Which color of light is preferred depends on the type of application : For work and for illumination on cloudy days, the daylight color is better late at night would make this one but to awake. Then, however, might even be too much of a good thing by their brightness the warm white version.
As photo lamps, reflection light are not suitable, even if energy saving lamps as an occasion to celebrate successes and reflection light to these significant advantages are: No slow brightening and no risk of breakage. However, the spectrum of the reflection light is still too unevenly - the tested cold white Lunartec 7×3 Watt PAR 30 delivered compared to daylight a greenish image - and the light distribution as well : let The reflection light provide a highly focused light, with the photograph only small objects.
The crux of the Lunartec 7×3 Watt PAR 30 is so far the price : They cost just under 80 euros individually, in packs of four are still 250 euros. While it may cost more, some designers lamp, but a "pear" you give that kind of money but hardly out, especially since in the past some Lunartec lamps service life problems had.
Why is eco friendly lighting a better choice in wintertime?
The upcoming winter season again promises shorter days with early onset of dusk. The longer periods of darkness can cost a company a lot of money every day; the company still uses outdated eco friendly lighting.
Characteristic for the winter time is the early onset of darkness. Linked to this, the power consumption for companies is increasing by the prolonged use of the bulbs in the company in the winter time considerably. Consequently, also increased energy costs for businesses. Here worthwhile for companies to look at the power consumption in the winter months and a calculation of the cost of electricity with the use of eco friendly lighting products such as energy saving lamps and renewable energy.
An example: A company with a service area of 1,000 square meters can save by sharing his 20 -year-old eco friendly lighting against a modern, energy-efficient lighting system almost 7,000 € electricity costs per year. Investing in a modern eco friendly lighting therefore pays for most companies after a few years.
Based on a current price of 16 cents / kWh, a Germany - and enterprise-wide conversion of old lights would to modern, energy-efficient lighting mean a saving of electricity costs in the amount of 500 million euros for the company.
In many cases, the companies are the Ensparpotenziale known, but deeds do not follow, as the individual savings, and the costs associated points are unknown. Where can I save my company and thus energy costs? What upgrades are needed? How do I design the most effective and cheapest upgrades? What grants are available to my company for energy-efficiency improvements? For all your questions, we have your answer.
We are happy to analyze again for your company's energy-related situation and calculate your individual savings. Energy consulting is KfW - funded and pays off for companies. You can reach us by dialing 03691/889 2194 or you will a free quote for an Energy Advice Request (only limited number of free offers available).
Characteristic for the winter time is the early onset of darkness. Linked to this, the power consumption for companies is increasing by the prolonged use of the bulbs in the company in the winter time considerably. Consequently, also increased energy costs for businesses. Here worthwhile for companies to look at the power consumption in the winter months and a calculation of the cost of electricity with the use of eco friendly lighting products such as energy saving lamps and renewable energy.
An example: A company with a service area of 1,000 square meters can save by sharing his 20 -year-old eco friendly lighting against a modern, energy-efficient lighting system almost 7,000 € electricity costs per year. Investing in a modern eco friendly lighting therefore pays for most companies after a few years.
Based on a current price of 16 cents / kWh, a Germany - and enterprise-wide conversion of old lights would to modern, energy-efficient lighting mean a saving of electricity costs in the amount of 500 million euros for the company.
In many cases, the companies are the Ensparpotenziale known, but deeds do not follow, as the individual savings, and the costs associated points are unknown. Where can I save my company and thus energy costs? What upgrades are needed? How do I design the most effective and cheapest upgrades? What grants are available to my company for energy-efficiency improvements? For all your questions, we have your answer.
We are happy to analyze again for your company's energy-related situation and calculate your individual savings. Energy consulting is KfW - funded and pays off for companies. You can reach us by dialing 03691/889 2194 or you will a free quote for an Energy Advice Request (only limited number of free offers available).
Tuesday, January 14, 2014
What are the major application of LED reflection light?
Looking for the best price for 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight and want to get the best deals and best buy this product? Or you want to find reviews from people who have used this product before you buy?
You are in the right place. I'll give you some advice before you decide to buy 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight. So you are not disappointed after purchase and in accordance with the product you need.
You can also find price comparisons vendors I met, so you really get the best price for 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight. Product Information 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight
Interested in buying this product? Find the best deals today to 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight.
You are in the right place. I'll give you some advice before you decide to buy 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight. So you are not disappointed after purchase and in accordance with the product you need.
You can also find price comparisons vendors I met, so you really get the best price for 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight. Product Information 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight
Interested in buying this product? Find the best deals today to 5 x 120 reflection light, GU10 LED, SMD 3 watt 6000k, Daylight.
Subscribe to:
Posts (Atom)